oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 813-if160.0m-p 160mhz if saw filter 9.2mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 813-if160.0m-p january 2011 rev a 160mhz if saw filter 9.2mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description a, b, c, d, f, g, h, i, j, l ground k input e output test fixture & values input l1=18nh, c1=24pf output l2=27nh, c2=24pf source/load impedance 50 ?
oscilent part number 813-if160.0m-p january 2011 rev a 160mhz if saw filter 9.2mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c -30 - +80 storage temperature range c -40 - +85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz - 160.00 - insertion loss at fo db - 23.0 24.5 amplitude ripple within fo 4.35 mhz db p-p - 0.55 1.0 group delay variation within fo 4.35 mhz nsec - 60 150 absolute delay at fo sec - 1.62 - temperature coefficient ppm/c - -20 - bandwidth at ?1.0 db mhz - 9.20 - bandwidth at ?3.0 db mhz 9.30 9.50 - bandwidth at ?40.0 db mhz - 10.85 10.95 relative attenuation: lower sidelobe db 45 50 - upper sidelobe db 45 50 -
oscilent part number 813-if160.0m-p january 2011 rev a 160mhz if saw filter 9.2mhz bandwidth product specification p. 3 www.oscilent.com frequency response
|